26
For transmitters rated at a maximum output power not listed above, the
recommended separation distance d in meters (m) can be estimated
using the equation applicable to the frequency of the transmitter, where
p is the maximum output power rating of the transmitter in watts (W)
according to the transmitter manufacturer.
NOTE 1 - At 80 MHz and 800 MHz, the separation distance for the higher
frequency range applies.
NOTE 2 - These guidelines may not apply in all situations. Electromagnetic
propagation is affected by absorption and reflection from struc-
tures, objects and people.
WARRANTY
The product is guaranteed against any conformity defect in normal
conditions of use as provided for by the instructions for use.
The warranty shall not therefore apply in the case of damages caused
by improper use, wear or accidental events.
For the duration of warranty on conformity defects please refer to the
specific provisions of national laws applicable in the country of pur-
chase, where provided.
Symbol Descriptions
The CE mark and
Notified Body Reg-
istration Numbers,
the requirement
of Annex II from
Medical Device Di-
rective 93/42/EEC
are met.
It means that the de-
vice is subject to the
EU directive on the
disposal of electrical
and electronic equip-
ment. To protect
the environment,
dispose of useless
device at appropri-
ate collection sites
according to national
or local regulations.
Authorized
representative
in the Euro-
pean com-
munity
Caution Instructions
Paper
Recycling
Manufacturer BF type applied part
Battery
Recycling
Classification for
water ingress and
particulate matter.
Date of production
Medical
device
1639
To Next Page
Loading...
