To Next PageTo Next PageWhat to do if Chicco THERMO-PRECISION does not turn on?
If your Chicco Thermometer isn't turning on or responding, and the display remains off, try these steps: First, reset the thermometer by pressing and holding the “ON” and “M” buttons simultaneously for 3 seconds. If that doesn't work, replace the old battery with a new one. If the thermometer still doesn't function after these steps, further assistance may be needed.
What to do if Chicco THERMO-PRECISION Thermometer battery is dead?
If your Chicco Thermometer's battery is dead and no more measurements can be taken, replace the old battery with a new one immediately.
What to do if Chicco THERMO-PRECISION Thermometer shows the wrong temperature?
If your Chicco Thermometer is showing temperature readings outside of the 34.4°C - 42.6°C (93.4°F - 108.7°F) range, wait 2 minutes. Then repeat the measurement and wait for the 4 beeps before moving the thermometer.
Why Chicco THERMO-PRECISION Thermometer temperature measured is instable?
If you are getting instable temperature from Chicco Thermometer, wait 2 minutes and repeat the measurement strictly as described in this manual above.
What to do if Chicco THERMO-PRECISION operating temperature is too low?
If your Chicco Thermometer shows that the operating temperature is lower than 16°C (60.8°F), place the thermometer in a room where the temperature is between 16°C and 36°C (60.8°F - 96.8°F). Wait 30 minutes before taking another temperature reading.
What to do if Chicco THERMO-PRECISION Thermometer operating temperature is too high?
If your Chicco Thermometer indicates that the operating temperature is higher than 36°C (96.8°F), place the thermometer in a room where the temperature is between 16°C and 36°C (60.8°F - 96.8°F). Allow the thermometer to adjust for 30 minutes before attempting another reading.
How to fix general function problem in Chicco THERMO-PRECISION Thermometer?
To address a general function problem with your Chicco Thermometer, reset it by pressing the “ON” and “M” buttons simultaneously and keeping them pressed for 3 seconds. If the thermometer still does not function, further assistance may be needed.
General| Response Time | 1 second |
|---|---|
| Fever Alarm | Yes |
| Measurement Method | Infrared |
| Measurement Site | Forehead |
| Accuracy | ±0.2 °C (±0.4 °F) |
| Battery | 2 AAA batteries |
| Auto Power Off | Yes |
| Display | LCD |
Explains normal body temperature variations and fever definition.
Provides essential steps and advice for accurate temperature readings.
Details the procedure for taking temperature measurements with the device.
Explains how to save and recall up to 8 measurements.
Describes how to change between Celsius and Fahrenheit display modes.
Guides on how to replace the device's batteries.
Outlines the terms and duration of the product warranty.
Details compliance with EMC regulations and precautions.
