Chicco Fit 4 - Install Using LATCH

62
63
STAGE 1 & 2
REAR-FACING INSTALLATION
STAGE 1 & 2
REAR-FACING INSTALLATION
INSTALL USING LATCH
9
8
7
6
5
4
3
2
1
PULL
1
PULL
2
1
Make sure
SuperCinch® LATCH
Tightener strap (Pull
2
nd
) is loosened to
the full length.
Make sure LATCH
Adjuster strap (Pull
1
st
) is loosened to
the full length.
INSTALL USING LATCH
Locate the LATCH Connector Storage compartments. Remove LATCH
straps. Make sure SuperCinch® LATCH Tightener strap (Pull 2
nd
) and
LATCH Adjuster strap (Pull 1
st
) are loosened to their full length.
1
Do not use the lower anchors of the Child Restraint anchorage system
(LATCH system) to attach this Child Restraint when restraining a child weighing
more than 35 lbs (15.9 kg) with the internal harness of the Child Restraint.
When installing with LATCH in a vehicle equipped with inflatable
seat belts, the unused seat belt should NOT be buckled behind the Child
Restraint System as this will engage the inflatable portion of the belt.