Do you have a question about the Chicco KeyFit 30 Zip and is the answer not in the manual?
Invert the car seat carrier to prepare for shoulder pad removal.
Remove the right and left harness straps from the splitter plate.
Turn the carrier upright and pull the harness straps out.
Detach both shoulder pads from the harness straps.
Extend the canopy by unzipping the zipper located at the back.
Pull the canopy forward to extend the mesh section.
Access the baby through the front zippered flap after securing the boot.
Lists all components included in the softgoods removal process.
Instructions for removing the seat pad by unhooking bands and pulling tabs.
Steps to remove the boot by undoing snap buttons.
Procedure to remove the crotch strap pad by unbuckling and pushing a tab.
Spot-clean with mild soap and water or machine wash on delicate.
Hang fabrics to dry; do not bleach.
Invert the car seat carrier to prepare for shoulder pad removal.
Remove the right and left harness straps from the splitter plate.
Turn the carrier upright and pull the harness straps out.
Detach both shoulder pads from the harness straps.
Extend the canopy by unzipping the zipper located at the back.
Pull the canopy forward to extend the mesh section.
Access the baby through the front zippered flap after securing the boot.
Lists all components included in the softgoods removal process.
Instructions for removing the seat pad by unhooking bands and pulling tabs.
Steps to remove the boot by undoing snap buttons.
Procedure to remove the crotch strap pad by unbuckling and pushing a tab.
Spot-clean with mild soap and water or machine wash on delicate.
Hang fabrics to dry; do not bleach.












Loading...