16 17
Cup Holders can be attached to the
right side of the Bumper Bar and either
side of the Stroller Frame. The Cup
Holders are interchangeable and will
fit in any of the 3 available positions.
9A. To attached the Cup Holder (C),
locate the Cup Holder attachment
post on the Stroller. Slide the notched
cutout on the Cup Holder onto the
Cup Holder attachment post, as
shown. Press down on the top edge
of the Cup Holder above the notched
cutout until it is fully seated.
How to Use Cup Holder How to Use Cup Holder
9B. The attachment post on the
Bumper Bar is square to prevent your
child from rotating the Cup Holder
upsidedown.
To remove the Cup Holder, reverse
step 9A.
9B9A
To Next Page
Loading...
