8
Meet Your Cube
The Basics
Familiarize yourself
with the layout of
the cube.
Review the basics of the
cube’s display.
The display is touch
sensitive, therefore force is
not needed when pressing
buttons.
°F
°C
Mute
Increase
Temperature
Decrease
Temperature
Low Water
Indicator
Power
Button
Current
Temperature
Setup Your ChiliPad
The Five Easy Steps
1. Place the Pad
2. Connect the Tube
Unfold and place the pad
directly on top of your mat-
tress but underneath your
tted sheet.
Adjust the pad straps to t
around mattress. You can
position the pad tubes at
the head or foot of your
bed depending on your
preference.
Set your cube on a at surface
with at least 24” of breathing
area around all sides of the
cube. You may use bed risers to
place the cube underneath your
bed.
Take the end of the tube and
connect it to your cube by
evenly pushing the connector
into the cube’s protruding
connectors. The blue release
button should be facing up
when connecting.
Water
Reservoir
Control
Panel
Air Intake
Vent
Water
Tube
Power
Cord
To Next Page
Loading...