Chili Technology ChiliPad

Questions and Answers

J
Jeremy StephensJul 28, 2025
Why my Chili Technology Temperature Controller doesn't cool or heat as well as it used to?
- E
  Eric PattersonJul 28, 2025
  If your Chili Technology Temperature Controller isn't cooling or heating as well as it used to, ensure the cube is full of water. Also, check that the cube is on a flat surface and inspect the water tubing for kinks or sharp angles. Regularly performing these checks can help. Using a blanket to insulate your sleeping environment can also greatly improve the system's cooling and heating effectiveness.
M
Melanie ThomasAug 3, 2025
What to do if my Chili Technology ChiliPad doesn't turn on?
- L
  Luke Montgomery MDAug 4, 2025
  If your Chili Technology Temperature Controller doesn't turn on, first check if the outlet has power and ensure the power cord is securely plugged into the cube. If the water drop icon is displayed, add water according to the instructions. If you're using the remote, try replacing the batteries.
J
Jacob BoyerAug 12, 2025
What to do if the display panel of my Chili Technology ChiliPad Temperature Controller shows an “F” error?
- M
  mitchellmatthewAug 12, 2025
  If the display panel of your Chili Technology Temperature Controller shows an “F” error, turn the cube off, unplug it, and wait 15 minutes before turning it back on. Then, set your ideal temperature. If the error code persists, note the specific error code (e.g., F1, F2, F3, F4), unplug the cube, and contact customer service.
M
Michael WrightAug 19, 2025
How to fix condensation on my Chili Technology ChiliPad Temperature Controller pad?
- D
  Derek LyonsAug 19, 2025
  If your Chili Technology Temperature Controller pad feels wet or condensation appears on the tube, adjust the temperature on the cube or remote in 2-degree increments towards your ambient room temperature until the condensation issue is resolved.