What to do if red light is flashing on Chiltern Invadex WISPA 100 Plus Medical Equipment?
If the red light on your Chiltern Invadex Medical Equipment is flashing, the batteries are critically low. You should charge them immediately.
Why does my Chiltern Invadex WISPA 100 Plus Medical Equipment hoist make a beeping sound?
If your Chiltern Invadex Medical Equipment hoist is making a beeping sound, it's likely because the battery is low or the hoist was left off charge. To resolve this, charge the batteries and return the hoist to its charging point.
What does it mean if the red light is on for Chiltern Invadex WISPA 100 Plus Medical Equipment?
If the red light is on for your Chiltern Invadex Medical Equipment, it indicates that the battery is low. Charge the batteries to resolve this.
What does it mean if the green light is on for Chiltern Invadex Medical Equipment?
If the green light is on for your Chiltern Invadex Medical Equipment, it means the batteries are charging. The light will turn off when charging is complete.
How to fix Chiltern Invadex WISPA 100 Plus Medical Equipment hoist lacking power?
If your Chiltern Invadex Medical Equipment hoist is lacking power, it is probably because the battery is low. You should charge the batteries.
Why are the red and green lights flashing on my Chiltern Invadex WISPA 100 Plus Medical Equipment?
If the red and green lights are flashing on your Chiltern Invadex Medical Equipment, it indicates the hoist is idle. Return it to charge.
Why does Chiltern Invadex WISPA 100 Plus hoist lift when down button is pressed?
If your Chiltern Invadex Medical Equipment hoist lifts when the down button is pressed, the airline may be incorrectly installed, or the lifting tape may be reversed on the spool. To correct this, ensure the black line on the handset aligns with the raised edges on the hoist connection when inserted into the grommet on the hoist box. Alternatively, press the up button to lower the carry bar while gently pulling the lift tape down to the end of its travel. The tape will then rewind itself correctly, or the lower cutout will operate. If the lower cutout operates, the tape is wound correctly.
What does it mean if the orange light is flashing on Chiltern Invadex WISPA 100 Plus Medical Equipment?
If the orange light is flashing on your Chiltern Invadex Medical Equipment, it means a service is overdue. You should arrange a service call.
What does it mean if the orange light is on for Chiltern Invadex WISPA 100 Plus?
If the orange light is on for your Chiltern Invadex Medical Equipment, it means a service is due. You should arrange a service call.
Essential checks and precautions before operating the hoist.
Procedure for stopping the hoist in an emergency.
Steps to reset the hoist after an emergency stop or overload.
Conditions that require the hoist to be taken out of service.
Troubleshooting steps for battery-powered models.
Troubleshooting steps for powered models.
Troubleshooting steps applicable to all hoist models.
General| Brand | Chiltern Invadex |
|---|---|
| Model | WISPA 100 Plus |
| Category | Medical Equipment |
| Language | English |
To Next Page