EasyManua.ls Logo

Chiltern Invadex WISPA 100 Plus - Installation Notes

Chiltern Invadex WISPA 100 Plus
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HOIST 100 Series
Page 10
Issue 2.0June 2018
Important Information - Transformer Powered Models
Please note that the brown and blue wires on the hoist curly cable
can be connected to either of the two blue wires in the transformer.
Installation Notes
Important Information - Battery Powered Models
Where this hoist is to be a replacement unit on an existing track
installation, the charging unit included in the box MUST be used.
This hoist is NOT compatible with the old RED charging unit.
Use of this hoist with the old RED charger may result in damage
to the PCB and WILL invalidate the product warranty.
For further information please contact our Technical team on
01869 365500.