NVF5 Series Inverter Quick Start-Up Wizard
1.Safety Precautions
The purpose of this quick start-up wizard is to guide you
to complete the basic installation 、 wiring and basic
parameters setting、commissioning and troubleshooting for
NVF5 series inverter products. For more information, please
refer to the user manual or scan the QR code to get the user
materials. This NVF5 series products have been strictly
tested and packaged before leaving the factory. If abnormal
information such as inverter damage and wrong delivery is
found, please contact Chint channel or the relevant office
or call Chint oversea hotline：400-1177-797
Attention：
It is not permitted to conduct unauthorized modification in case of the danger of
fire/electric shock and other hurt！
Installation must be conducted by qualified personnel in case of the danger of
electric shock！
Please install the inverter on the metal equipmen(supplementary enclosure) or
other non-combustible objects in case of the danger of fire!
It is not permitted to place combustibles nearby in case of the danger of fire!
The products should be installed with either fuses or an input circuit breaker
between the inverter and power supply in case of danger of fire!
It is not permitted to install the inverter in an environemnt containing explosive
gases in case of the danger of explosion!
It is not permitted to insall the inverter at a place directly exposed in sunlight in
case of the danger of equipment damage!
It is not permitted to install the inverter on occasions where water splashing in
case of the danger of equipment damage!
Installation Dimensions：
Figure 1-1 Figure 1-2
To Next Page
