6
REMINDERS (OPTIONAL)
If you have voice reminders enabled on your base unit, a message will
play at a pre-set time. It will announce the time and type of reminder.
For example, “This is your ten thirty reminder. It is time to take your
medicine,” followed by “Press Cancel to silence this reminder.”
Press the flashing orange Cancel button to acknowledge and clear
the reminder. The message will repeat periodically until
acknowledge or replaced by the next reminder.
DAILY CHECK (OPTIONAL)
If your system has a ‘Daily Check’ enabled, the Connect button will flash
blue at a pre-set time each day. Press the Connect button to send a Daily
Check report to monitoring, and a voice message will play.
If you do not press the Connect button, the monitoring centre will try to
make contact with you to check if you are OK.
AWAY FUNCTION
It is recommended to enable the ‘Away Function’ when you will be leaving
home for an extended period of time (e.g. more than 24 hours).
Press and hold the Cancel button during normal operation to enable the
‘Away Function’. The Cancel button will flash left to right until the ‘Away
Function’ is disabled.
Automated safety reports like pendant tracking and ‘Daily Check’ are
turned off when the ‘Away Function’ is enabled.
When you return home press and hold the flashing Cancel button to
disable the ‘Away Function’, the base unit will announce “Welcome back”.
To Next Page
Loading...