EasyManua.ls Logo

Chiptech SEVEN - Installation and Maintenance; Installation Location Guidance; Turning System On and Off; Cleaning and Maintenance

Chiptech SEVEN
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
INSTALLATION LOCATION
Do not unplug or move the SEVEN base unit from the location it has been
installed. The location it is installed in has been tested to ensure it has
good cellular connectivity, and range with your personal help button.
Moving it could adversely affect the ability to send an alert for help.
If you are relocating, you will need to contact your service provider to
organise a new installation and change your address details.
TURNING ON AND OFF
To turn your system off press and hold the Power button, it will play an
instructional message, followed by 4 beeps. Continue to hold until you
hear the last beep, and it will switch off.
To turn the system on again, press the Power button until the
welcome message plays, the green light indicates it is on.
WARNING: When the system is turned OFF, and there is NO Power
button light, your system will not operate and you cannot send an alert
for help.
CLEANING AND MAINTANENCE
Do not spray your personal help button or base unit with perfume, insect
repellent or similar harsh chemicals.
Clean your personal help button and base unit with a warm (well wrung
out) damp cloth. Do not use abrasive or polishing cleaners.
Do not immerse your base unit in liquid, or position it in a place where
liquids can be spilled on it.
Do not try to open any part of your base unit or personal help button.
Do not stick objects in any of the holes or sockets on your base unit or

Related product manuals