Chison ECO 2VET - User Manual

Need help?

Do you have a question about the Chison ECO 2VET and is the answer not in the manual?

Summary

Chapter 2 System Safety

2.1 Safety Overview

Discusses measures to ensure the safety of both the operator and the patient during system use.

2.2 Electrical Safety

Covers protection against electric shock, harmful water ingress, and flammable environments.

2.3 Labels and Warning Symbols

2.4 Patient and Biological Safety

Details on patient environmental devices, biological safety considerations, and handling precautions.

2.6.1 Safe Scanning Guidelines

Provides specific rules and precautions for performing ultrasound scans safely.

2.6.2 Understanding MI;TI Display

Chapter 3 System Introduction

3.5 Installation Procedures

Outlines the necessary steps and conditions for installing the ultrasound system.

3.5.1 Environment and Operation Space

3.5.2 Powering the System

Details the procedures for powering on the system, including acclimation time.

3.5.3 Probe Installation

Provides instructions and cautions for installing ultrasound probes correctly.

3.5.4 Accessories Installation

Chapter 5 Operation and Exam Mode

5.1 Preparation and Mode Selection

5.3 Patient Data Entry

5.6 B Image Adjustment

5.18 DICOM Functions

Explains DICOM storage, worklist, print, and SR functionalities.

Chapter 6 Measurement and Calculation

6.1 Measurement Keyboard

Details the keyboard functions used for performing measurements.

6.2 B Mode Measurement Methods

Explains general measurement methods in B mode, including distance, ellipse, and trace.

6.2.1 Distance Measurement

6.2.2 Ellipse Measurement

6.2.3 Trace Measurement

6.2.4 Histogram and Cross-section

6.3 B Fast Measurement

6.4 B General Measurement

6.5 B Canine Measurement

6.7 B Equine Measurement

6.8 B Bovine Measurement

6.9 B Ovine Measurement

6.10 M, B;M Mode Measurement

Explains measurements and calculations in M and B/M modes.

6.17 PW Mode Measurement

Details the methods for performing measurements in PW Doppler mode.

Chapter 7 Preset Configuration

7.1 General Settings

7.2 Measurement Settings

Details measurement units and formula settings for various measurements.

7.2.1 General Measurement Setting

7.2.2 Measurement Formula Setting

Enables customization and editing of measurement formulas.

7.5 Exam Mode Configuration

7.5.3 Exam Mode Configuration

7.7 DICOM Configuration

Explains how to set up DICOM services for storage, worklist, print, and SR.

7.7.1 Add;Edit DICOM Function

Guides on adding and editing DICOM service configurations.

7.8 Network Setup

7.9 System Settings

Chapter 8 System Maintenance

8.1 Machine Cleaning

8.2 Probe Maintenance

Covers care, maintenance, inspection, and cleaning of ultrasound probes.

8.3 Safety Check

Recommends regular safety checks to ensure the device operates normally.

8.4 Malfunction Check

Provides a table to identify common malfunctions, their reasons, and measures to resolve them.

Chapter 9 Probe Care and Operation

9.2 Probe Care and Maintenance

Details how to care for and maintain ultrasound probes, including inspection and cleaning.

9.2.1 Probe Inspection

9.2.2 Probe Cleaning and Disinfecting

Provides detailed procedures for cleaning and disinfecting ultrasound probes.

9.3 Probe Operation Instructions

Guides on connecting, activating, deactivating, and storing probes.

9.3.1 Patient Scanning

9.3.2 Transvaginal Probe Operation

9.3.3 TV;TR Probe Cleaning and Disinfection

Detailed cleaning and disinfection procedures for TV and TR probes.

9.4 Service Responsibility

Outlines service responsibilities, warranty, and maintenance requirements.

Chison ECO 2VET Specifications

General

Probe Connectors	2
Gray Scale	256 levels
Cine Loop	Yes
THI	Yes
Zoom	Yes
Power Supply	AC 100-240V, 50/60 Hz
Type	Veterinary Ultrasound
Probe Types	Convex, Linear, Micro-Convex
Frequency Range	2.5-10 MHz
Scan Modes	B, B/M, 4B, M
Measurement Functions	Distance, Area, Volume, Obstetrics
Image Storage	USB
Monitor Resolution	1024 x 768
Display	12-inch LED