To Next PageTo Next PageWhat to do if the menu bar displays but there is no scanning image on Chison Medical Equipment?
If the menu bar is visible but there's no scanning image on your Chison Medical Equipment, it may be due to incorrect transmission frequency, gain, or STC control settings. Adjust these settings accordingly. Also, ensure that the system is correctly connected. If the system is frozen, defreeze it by pressing the FREEZE icon.
Why is the power indicating lamp lit but there are no images on the Chison SonoEye P3 Medical Equipment display?
If the power indicating lamp is lit when you turn on your Chison Medical Equipment, but there are no images on the display, the restart time interval after shutdown may be too short. Wait 1 minute after powering off the system before turning it back on.
General| Probe Types | Convex, Linear, Phased Array |
|---|---|
| Operating System | Android |
| Type | Portable Ultrasound |
| Transducer Frequency | 2.0 - 10.0 MHz |
| Imaging Modes | B-mode, M-mode, Color Doppler, PW Doppler |
| Connectivity | Wi-Fi, Bluetooth, USB |
| Probe Connectors | 1 |
