CHMER Wire-Cut EDM Operation Manual W5F
0-2 Safety Instruction
0-2-1Machine stop
When the emergency occurs, operator can stop machine by following two ways：
Emergency Stop & Main Power switch.
Emergency Stop：When pressed, except of computer power, motors, pumps
would be shut off.
Main Power：When turned off, the power of machine and Power Cabinet will
all be shut off.
No Fuse Breaker：Be sure to turn off no fuse breaker and main power before
maintenance.
0-2-2 Precaution of safe operation
A safe operation is relying on complete precautions to occasional accidence,
machine breakdown and operator negligence. Please keep these in mind and
check machine security every time before actual operation. Even though,
there are many built-in safety constructions in machine, still possible to have
potential dangers if depends on machine too much and absent the precautions in
mind.
Emergency Stop
Main Power
No Fuse Breaker
0-5
To Next Page
Loading...