Chord TToby - Connecting to Ancillary Equipment

Chord Electronics
TToby | Manual
_
When connecting the TToby to
equipment within the signal path,
ensure all devices are switched
o. It is recommended that
once all equipment is properly
connected, that the volume
setting is operated to its lowest
setting, before slowly being
raised to a comfortable listening
level. Always observe partnering
manufacturers’ guidelines.
4.1 Placement
4.2 Connecting TToby to
ancillary equipment
4.3 Line level inputs
4.4 Audio outputs
4.5 Power-on sequence
4.6 Earthing issues in Europe
Connecting TToby to ancillary
equipment
4.2
18 // 23