Speed Unit: Turn ON/OFF speed display, Press OK to select
either KMH or MPH.
Daylight Saving: Turn ON/OFF.
Parking Monitor:
This feature is designed to work when camera is shaken
during Hit & Run event while your car is parked. When
someone hits your car and shaking is detected based on your
G-sensor setting, the camera will turn on automatically, then
start recording for about 30S on internal battery, then lock
that video file safely so it does not get deleted by loop cycle
function & turns itself off automatically.
•On
•OFF (Default)
Format: Format the Micro SD Card.
•Cancel
•OK
NOTE: We recommend that you format your memory card
every 30 days to keep the card clean for smooth operation.
MPH
DST
P
33
To Next Page
Loading...
