CC2 Electric Barbecue Cooktop (Part numbers 1005 and 1006)
16 | Installation
2.2 Installation
STEP 1
Review section 1.10 Boxed contents, and check that all listed parts are present. Contact
Christie immediately if there any discrepancies.
Open the box and remove cardboard packers to reveal the underside of the appliance.
FIG. 7
This appliance must only be installed and serviced by an authorised
person (e.g. a licensed electrician) who will be directly responsible
for installing it according to the manufacturer’s instructions, AS/
NZS3000, and all relevant building and electrical regulations. For all
other countries the local applicable regulations and procedures must
be followed.
To Next Page
Loading...