Installation Manual 6838_05
13Installation |
Christie cooktops must be installed into structures that meet minimum
specifications for their safe operation. As a cooking appliance, it
reaches temperatures above 200°C, and adhering to the guidelines
below will reduce the possibility of injury.
2.1 Design guidelines for installing a CC2 cooktop
• Separate barbecues and eating facilities from playgrounds and other active recreation
areas wherever possible
• Install barbecues where they can be easily monitored for safe and appropriate use
• Ensure that there are no climbing aids that may allow children access to the cooktop
• Round off any protruding benchtop and corners that may cause injury
• Build electric barbecue structures from sturdy, non-combustible materials such as
brick, stone, or metal. Do not use combustible materials of any type
• Create a 495 mm x 495 mm cut-out in the benchtop to fit the cooktop. Refer to FIG. 4
• Allow a minimum space of 130 mm on all four sides of the cut-out hole and 1200 mm
clearance above the cooktop
• Christie provides pre-manufactured barbecue cabinets to suit most projects and
environments. We also offer options for built-in structures
NOTE: For installing the cooktop into a prefabricated Christie barbecue cabinet, please
refer to instructions for installing a CC2 cooktop on page 15.
To Next Page
Loading...