Need help?Do you have a question about the Christie D16WU-HS and is the answer not in the manual?
General| Matrix size | 0.96 \ |
|---|---|
| Matrix type | DMD |
| Heat dissipation | 4450 BTU/h |
| Native aspect ratio | 16:10 |
| Projection distance | - m |
| Vertical scan range | 24 - 85 Hz |
| Horizontal scan range | 15 - 91 kHz |
| Projection technology | DLP |
| Contrast ratio (dynamic) | 5000:1 |
| Contrast ratio (typical) | 1200:1 |
| Screen size compatibility | - \ |
| Projector native resolution | WUXGA (1920x1200) |
| Light source type | Laser |
| Service life of light source | 20000 h |
| Focus | - |
| Zoom capability | Yes |
| Focal length range | - mm |
| Supported 3D formats | Frame packing, Side by side, Top and bottom |
| Supported graphics resolutions | 640 x 480 (VGA), 1920 x 1200 (WUXGA) |
| HDMI version | 1.4 |
| BNC input ports | 1 |
| HDMI ports quantity | 3 |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| S-Video inputs quantity | 0 |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Cables included | AC |
| Remote control type | Wireless/Wired |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 / 60 Hz |
| Power consumption (standby) | - W |
| Power consumption (typical) | 1300 W |
| Noise level | 45 dB |
| Certification | UL/CSA/IEC 60950-1 FCC Class A CE FDA CCC KC PSE CU SABS BIS VCCI RCM Ukr TER SASO REACH WEEE |
| Noise level (economic mode) | 39 dB |
| Placement | Desktop |
| Product type | Large venue projector |
| Product color | Black |
| Market positioning | Business |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 0 - 85 % |
| Sustainability certificates | RoHS |
Weight and Dimensions| Depth | 677 mm |
|---|---|
| Width | 596 mm |
| Height | 203 mm |
| Weight | 42500 g |
| Package depth | 923 mm |
| Package width | 843 mm |
| Package height | 513 mm |
| Package weight | 54000 g |
Provides essential warnings, cautions, and notices for safe operation and handling.
Details safety precautions related to AC power connections and installation procedures.
Explains hazards associated with laser radiation and light intensity, including exposure limits.
Details the projector's technology, performance, and key features like resolution and brightness.
Information on power requirements and connection for the projector.
Explains the functions of the projector's built-in keypad.
Details the layout and functionality of the IR remote keypad buttons.
Step-by-step instructions for turning the projector on.
Step-by-step instructions for turning the projector off.
Configures the image size to its native resolution or resizes it.
Adjusts pixel phase to correct shimmer or noise in analog RGB signals.
Moves the image vertically or horizontally and adjusts digital size.
Saves and applies geometry correction settings like Keystone, Pincushion, and 4-Corner.
Digitally manipulates image shape for curved or anamorphic screens using Christie Twist.
Configures edge blends directly on the projector for seamless unified images.
Uses Christie Twist software for advanced edge blending options across multiple projectors.
Adjusts image intensity, difference between light/dark, and color decoding.
Configures edge clarity and settings for displaying 3D images.
Manages 3D signal inversion, sync output, frame delay, and L/R reference.
Calibrates primary colors, wall color, and adjusts color value based on gamma setting.
To Next Page
