Need help?Do you have a question about the Christie D20WU-HS and is the answer not in the manual?
General| Matrix size | 0.96 \ |
|---|---|
| Matrix type | DMD |
| Heat dissipation | 6653 BTU/h |
| Native aspect ratio | 16:10 |
| Projection distance | - m |
| Vertical scan range | 24 - 85 Hz |
| Horizontal scan range | 15 - 91 kHz |
| Projection technology | DLP |
| Contrast ratio (dynamic) | 5000:1 |
| Contrast ratio (typical) | 1200:1 |
| Screen size compatibility | - \ |
| Projector native resolution | WUXGA (1920x1200) |
| Light source type | Laser |
| Service life of light source | 20000 h |
| Focus | - |
| Zoom capability | Yes |
| Focal length range | - mm |
| Placement | Desktop |
| Product type | Large venue projector |
| Product color | Black |
| Market positioning | Business |
| Supported 3D formats | Frame packing, Side by side, Top and bottom |
| Supported graphics resolutions | 640 x 480 (VGA), 1920 x 1200 (WUXGA) |
| HDMI version | 1.4 |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Component video (YPbPr/YCbCr) in | 0 |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Cables included | AC |
| Remote control type | Wireless/Wired |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 0 - 85 % |
| AC input voltage | 200 - 240 V |
| AC input frequency | 50 / 60 Hz |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 1880 W |
| Power consumption (economy mode) | 1504 W |
| Noise level | 45 dB |
| Certification | UL/CSA/IEC 60950-1 FCC Class A CE FDA CCC KC PSE CU SABS BIS VCCI RCM Ukr TER SASO REACH WEEE |
| Noise level (economic mode) | 39 dB |
| Sustainability certificates | RoHS |
Weight and Dimensions| Depth | 677 mm |
|---|---|
| Width | 596 mm |
| Height | 203 mm |
| Weight | 42500 g |
| Package depth | 923 mm |
| Package width | 843 mm |
| Package height | 513 mm |
| Package weight | 54000 g |
General safety and warnings for projector operation and handling.
Electrical safety measures and installation precautions for the projector.
Guidelines and warnings for safe operation around laser light sources.
Information on hazard zones and distances related to projector light output.
General description, key capabilities, and advantages of the projector.
Information on power supply requirements and connection procedures.
Step-by-step guide for powering the projector on and off.
Options for setting image resolution and aspect ratio.
Correcting horizontal image distortion.
Correcting vertical image distortion.
Correcting horizontal/vertical pincushion and 4-corner distortion.
Adjusting image shape using Christie Twist for irregular surfaces.
Configuring direct image blending for seamless multi-projector setups.
Using Mystique for automated alignment, warp, and blend.
Adjusting image intensity, contrast difference, and color decoding.
Adjusting image clarity and configuring 3D display settings.
Saves user-defined picture adjustments.
Enhances contrast ratio and improves contrast with dynamic black.
Ensures image alignment and shifts lens to specific positions.
Manages laser diode power for brightness and lifespan.
Lists safety standards the product conforms to.
Lists laser safety standards the product conforms to.
Lists EMC standards the product conforms to.
To Next Page
