Need help?Do you have a question about the Christie D4K35 and is the answer not in the manual?
General| Resolution | 4096 x 2160 |
|---|---|
| Brightness | 35, 000 lumens |
| Projection Technology | DLP |
| Lens Options | Interchangeable lenses |
| Color Processing | 10-bit |
| 3D Ready | Yes |
| Contrast Ratio | 2000:1 |
| Weight | 90 kg |
Provides a general overview of the D4K35 projector's main parts and their locations.
Details the various interfaces for controlling the projector, including TPC, PC, and PIB3G.
Information on the 7kW Lamp Power Supply (LPS) and its operation.
Describes the Low Voltage Power Supply (LVPS) and Standby Power Supply.
Explains the safety interlocks that protect the projector during operation.
Details the electro-mechanical module for adjusting lamp position.
Details the optional MALM assembly for switching lens formats.
Critical cautions for module replacement and general repair safety.
Provides essential safety warnings and general precautions for servicing.
Details safety precautions related to AC power connections and supply.
Highlights explosion hazards associated with the lamp and required protective gear.
Critical safety step for allowing the lamp to cool completely before handling.
Procedures for checking the liquid cooling system level and status.
Instructions for safely filling the coolant reservoir with approved coolant.
Procedures for cleaning and inspecting the projector lamp connections.
Required adjustment for optimal lamp performance and brightness.
Using the 'Do Auto' feature for precise lamp positioning.
Manual adjustment of lamp position when 'Do Auto' fails or for fine-tuning.
Detailed description of adjusting red, green, and blue formatter convergence.
Criteria to determine when convergence adjustments are satisfactory.
Step-by-step guide for installing a software upgrade package.
Troubleshooting steps for when the projector does not power on.
Steps to diagnose why the projector lamp does not ignite.
Troubleshooting steps for when the lamp suddenly goes off.
Diagnosing image quality issues related to the lamp.
Steps to take when there is no display or a blank screen.
Steps to diagnose when the projector is ON but shows no image.
Provides critical safety warnings and guidelines before performing service.
Lists required tools and general guidelines for module replacement.
Critical procedure for replacing the projector lamp, including safety warnings.
Procedures for replacing interlock switches and vane switches.
Guidance on servicing the Lamp Power Supply unit.
Commands to calibrate the intensity feedback mechanism to footlamberts.
Commands for adjusting lamp position to optimize intensity and uniformity.
Commands to set lamp intensity setpoint for LiteLOC™ mode.
Commands to set lamp mode to constant power or LiteLOC™.
Commands to set lamp power in Constant Power mode.
Commands to change the projector's power state.
Details on panel resolution, refresh rate, brightness, contrast, and white point.
Lists supported input signal formats for 3GSDI, HDSDI, and DVI-D ports.
Details compatibility for Ethernet, RS232, GPIO, and SCCI interfaces.
Specifications for power input and consumption of projector components.
Details on supported lamp types, power, and average life.
Information on safety, environmental, and EMC regulations the product conforms to.
To Next Page
