Christie DWU951 User Manual (English)

Other manuals for Christie DWU951

Questions and Answers:

I
Ian WilliamsSep 9, 2025
What to do if my Christie Projector 'Cannot communicate with the projector (Wireless network)'?
- M
  Megan WalkerSep 9, 2025
  To resolve wireless network communication issues with your Christie Projector: * Consult with your network administrator. * Reconfigure the projector's encryption settings and reconnect to the network. * Ensure your encryption method is supported: WPA2-PSK(AES), WPA2-PSK(TKIP), WPA-PSK(AES), WPA-PSK(TKIP), WEP128bit, or WEP64bit. * Move the projector closer to the wireless device, and away from any doors. * Consult with your network administrator to check for interfering wireless devices. * Note that the USB wireless adapter (USB-WL-11N-NS) supports only 2.4GHz, not 5GHz. * Ensure wireless and wired LANs use different network addresses. * Enable the wireless network adapter in your computer's settings by referring to its user manual.
R
rfieldsAug 23, 2025
How to fix no input signal on my Christie Projector?
- M
  Mark WilsonAug 25, 2025
  If your Christie Projector displays 'no input signal,' confirm the signal input connection and check the status of the signal source.
J
Joshua GreenAug 25, 2025
What to do if my Christie DWU951 remote is not working?
- P
  Patrick CraigAug 26, 2025
  If your Christie Projector remote isn't working, the batteries might be drained. Try replacing the batteries.
K
Kayla RobbinsAug 26, 2025
What to do if my Christie DWU951 is overheating?
- N
  Nicholas KleinAug 27, 2025
  If your Christie Projector is overheating, turn the power off and allow it to cool down for at least 30 minutes. After it has cooled, and you've confirmed proper ventilation, turn the power on again.
R
Rachel ReeseAug 27, 2025
How to increase brightness on Christie Projector?
- G
  Gabriela HortonAug 27, 2025
  If the brightness on your Christie Projector is too low, adjust the BRIGHTNESS to a higher level using the menu functions.
J
Jennifer HallAug 29, 2025
How to correct input settings on Christie DWU951 Projector?
- R
  Robert TaylorAug 29, 2025
  If the input settings on your Christie Projector are mismatched, select the correct input signal and adjust the settings accordingly.
J
Joan SanchezSep 14, 2025
How to troubleshoot 'Cannot send an e-mail correctly' issue with Christie DWU951 Projector?
- X
  xkellySep 14, 2025
  If you cannot send an e-mail correctly from your Christie Projector, begin by checking if a test e-mail can be sent successfully using the [Send Test Mail] button on the Mail Settings screen of the Projector Web Control. Next, review the settings on the Mail Settings screen, ensure a valid e-mail address is set, and verify that the specific Error/Warning is configured to be sent on the same Mail Settings screen.
L
Lindsay WilliamsSep 10, 2025
Why 'Cannot use wireless LAN and wired LAN at the same time' on Christie Projector?
- R
  rodriguezmadisonSep 10, 2025
  To use both wireless and wired LAN on your Christie Projector, ensure that the same network address is not used for both. Set different network addresses for each. Alternatively, set the default gateway of either wired LAN or wireless LAN to 0.0.0.0.
J
Jodi PadillaSep 6, 2025
How to fix 'Cannot communicate with the projector (Wired network)' on my Christie DWU951?
- J
  Jessica SimmonsSep 6, 2025
  To resolve communication issues with your Christie Projector on a wired network: * Ensure the projector and network device are turned on. * If using the network function in standby mode, set it to NORMAL. * Connect the LAN cable, using the LAN port for WIRED NETWORK or the HDBaseT port when HDBaseT is selected. * Verify the MAC address on the projector matches the one in the WIRED NETWORK INFORMATION menu. * Check network settings in the WIRED NETWORK INFORMATION menu, consulting your network administrator if needed. * Ensure wireless and wired LANs have different network addresses. * Enable the wired network adapter in your computer's settings.
T
Thomas ChenSep 3, 2025
How to disable freeze function on Christie Projector?
- R
  Ricky KruegerSep 3, 2025
  If the FREEZE function is active on your Christie Projector, press the FREEZE button to restore the screen to normal.