Why does my Christie DHD600-G Projector have no image on screen?
First, ensure all cables and power connections are correctly and securely connected. Next, check if the lamp is securely installed. Finally, make sure you have removed the lens cap and the projector is switched ON.
What to do if the image on my Christie Projector is out of focus?
First, check that both lens caps (front and back) are removed. Then, adjust the lens focus. Also, ensure the projection screen is within the required distance.
How to fix a partial or scrolling image on my Christie Projector?
Try pressing the “AUTO” button on the control panel or remote control. If using a PC, verify that your display resolution setting is lower than or equal to WUXGA (1920 × 1200) in the “Display” settings of the “Control Panel”. If the projector is still not projecting the whole image, change the monitor display and verify the resolution setting is lower than or equal to WUXGA (1920 × 1200).
What to do if my Christie DHD600-G image is too small or too large?
Adjust the lens zoom to fit the screen. If it still doesn't fill the screen properly, verify that the correct lens is in use or change the position of the projector.
How to fix unstable or flickering image on Christie DHD600-G Projector?
Try using the “Pixel Track” and “Pixel Phase” settings to correct the image. Alternatively, change the monitor color setting on your computer.
How to fix image that has vertical flickering bar on Christie DHD600-G?
Try using the “Auto Image” feature to make an adjustment. You may also need to check and reconfigure the display mode of your graphic card to ensure it is compatible with the projector.
What to do if my Christie DHD600-G Projector lamp burns out or makes a popping sound?
If the lamp burns out, try power cycling the projector. If the lamp doesn't fire or you hear a loud pop, the projector will not turn on until the lamp module has been replaced.
Why is the image stretched when displaying 16:9 DVD title on my Christie DHD600-G?
When playing anamorphic or 16:9 DVDs, set the projector display mode to 16:9 in the OSD. If playing 4:3 format DVDs, change the format to 4:3 in the projector OSD. If the image is still stretched, adjust the aspect ratio by setting the display format as 16:9 (wide) on your DVD player.
What if the notebook screen isn't displaying the presentation on my Christie DHD600-G?
Some Notebook PCs may deactivate their own screens when a second display device is in use. Refer to your computer manual for detailed information on how to reactivate it.
How to fix a partial or scrolling image on Christie DHD600-G Projector when using a notebook?
Adjust the resolution of the computer. Press the appropriate keys for your notebook manufacturer to send the signal from the notebook to the projector. For example, [Fn]+[F4]. If you experience difficulty changing resolutions or your monitor freezes, restart all equipment, including the projector.
General| Heat dissipation | 1979 BTU/h |
|---|---|
| Native aspect ratio | - |
| Projection distance | - m |
| Vertical scan range | 24000 - 85000 Hz |
| Horizontal scan range | 15 - 100 kHz |
| Projection technology | DLP |
| Contrast ratio (dynamic) | 4800:1 |
| Screen size compatibility | - \ |
| Projector native resolution | 1080p (1920x1080) |
| Offset | 120 % |
| Focal length range | - mm |
| USB connector type | USB Type-A, Mini-USB B |
| Serial interface type | RS-232C |
| USB 2.0 ports quantity | 2 |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 0 |
| Wi-Fi | No |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Lamp power | 580 W |
| Lamps quantity | 1 lamp(s) |
| Light source type | Lamp |
| Lamp power (economic mode) | 450 W |
| Service life of light source | 2000 h |
| Cables included | DVI, RCA, DisplayPort, USB, RS-232, HDMI, S-Video, LAN (RJ-45) |
| Remote control type | Wired |
| Power source | AC |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 10 - 85 % |
| Noise level | 39 dB |
| Noise level (economic mode) | 35 dB |
| Dot clock scanning frequency | 162 MHz |
| Placement | Desktop |
| Product type | Large venue projector |
| Product color | White |
| Sustainability certificates | RoHS |
Weight and Dimensions| Depth | 388 mm |
|---|---|
| Height | 27 mm |
| Weight | 15300 g |
| Package depth | 591 mm |
| Package width | 501 mm |
| Package height | 443 mm |
| Package weight | 20500 g |
Details copyright and trademark information for the product.
Provides regulatory compliance information for the projector.
Outlines limitations and exclusions of the projector's warranty.
Emphasizes maintenance to avoid voiding the warranty.
Lists critical safety warnings regarding projector operation and handling.
Specifies operating conditions and cleaning instructions for the projector.
Identifies components visible on the front of the projector.
Identifies components visible on the rear of the projector.
Identifies components visible on the left side of the projector.
Identifies components visible on the right side of the projector.
Explains the function of each button on the projector's keypad.
Lists and illustrates the projector's input and output connectors.
Shows a diagram of the projector's remote control.
Explains the function of each button on the remote control.
Explains the meaning of different states for the Lamp LED.
Explains the meaning of different states for the Status LED.
Explains the LED status for the Picture Mute function.
Illustrates connecting the projector to desktop and laptop computers.
Shows connections for video sources like DVD players and VCRs.
Provides step-by-step instructions for powering on the projector.
Provides step-by-step instructions for powering off the projector.
Offers guidelines for positioning the projector for optimal projection.
Explains how to calculate vertical and horizontal lens offsets.
Illustrates vertical image offset examples for WUXGA projectors.
Illustrates vertical image offset examples for HD projectors.
Illustrates negative vertical image offset for HD projectors.
Illustrates horizontal image offset for projectors.
Illustrates vertical image offset examples for WUXGA projectors.
Illustrates negative vertical image offset for WUXGA projectors.
Illustrates horizontal image offset for projectors.
Provides step-by-step instructions for lens removal and installation.
Details the procedure for installing the cable cover.
Displays the projector's main menu options for operation.
Allows adjustment of image size, position, and aspect ratio.
Explains adjustments for pixel phase, horizontal/vertical position, and zoom.
Introduces geometry correction for image distortion.
Details vertical and horizontal keystone correction settings.
Details vertical and horizontal pincushion correction settings.
Corrects slight curved distortion from the lens or projection surface.
Squeezes image to fit a defined area by moving corners.
Rotates the image, commonly to level it.
Reacquires and locks to input signal for marginal quality.
Adjusts image intensity, contrast, and color space.
Adjusts image detail, video options, and input levels.
Optimizes images and saves custom settings.
Features for dynamic contrast and pausing the image.
Offers advanced adjustments for gamma, color, and edge enhancement.
Selects the OSD display language.
Adjusts focus, zoom, lens shift, and calibrates lens center.
Configures projection orientation and mode.
Adjusts OSD position, transparency, and enables PIN protection.
Configures power saving and high altitude fan settings.
Configures network settings like DHCP, IP address, and host name.
Sets up network parameters including IP, subnet, and gateway.
Creates seamless multi-projector images by blending edges.
Matches colors across displays by adjusting hue and coordinates.
Adjusts color slide bars by eye or meter.
Assigns functions to hot-keys and accesses service features.
Selects Constant Power, Constant Intensity, or ECO mode.
Sets lamp power and maintains constant brightness.
Displays lamp status and resets usage hours.
Calibrates the light sensor for constant intensity.
Displays detailed status information for DHD Models.
Displays detailed status information for DWU Models.
Displays detailed status information for DWX Models.
Manages main and PIP/PBP input sources, swap, size, and layout.
Provides a table for PIP/PBP layout and size combinations.
Selects timing detection mode and displays source details.
Assigns a different source to the hot-key.
Allows selection of available languages for the OSD display.
Selects internal test patterns for display.
Steps to log in to the projector's web management interface.
Displays general projector information and control options.
Shows current status of lamp, cooling, version, and signal.
Controls focus, lens shift, and zoom adjustments.
Configures network settings for the projector.
Restarts network connection and resets network settings.
Configures SNMP settings for network management.
Accesses control pages and manages projector users/passwords.
Displays firmware, model, and serial number information.
Provides firmware version and license information.
Details connecting to the projector via WiFi or Ethernet.
Steps to download and install the Christie Presenter software.
Sets up the Christie Presenter software for use.
Instructions on how to use the Christie Presenter application.
Illustrates the main window of the Christie Presenter application.
Guides on connecting to the projector using its IP address or searching.
Allows selection of FullScreen, FixedSize, or Alterable display regions.
Configures basic and advanced settings for Christie Presenter.
Controls users and projectors connected to the network display.
Detects and displays connected USB flash devices.
Displays photo thumbnails and selected images/folders.
Supports operations for image slide shows.
Provides steps for installing a new projector lamp.
Instructions for loosening screws and removing the old lamp module.
Instructions for installing a new lamp and securing it.
Solutions for when no image is displayed or display is incorrect.
Specific solutions for notebook users with image display problems.
Solutions for images that are out of focus or incorrect size.
Troubleshooting steps for lamp failure or unusual sounds.
Lists supported resolutions and frame rates for various input types.
Details PC input resolutions and frame rates for HDMI, VGA, DP, DVI.
Continues listing PC input resolutions and frame rates.
Lists supported resolutions and frame rates for video and HDTV inputs.
Continues listing HDTV input resolutions and frame rates.
Shows which main and PIP/PBP input combinations are enabled.
Highlights major features like resolution, lens compatibility, and dynamic aperture.
Lists all items included in the projector package.
Lists available optional accessories for the projector.
Details safety, EMC, environmental, and marking compliance information.
Provides FCC warning regarding power cords and signal cables.
Shows the hierarchical structure for Size & Position OSD menus.
Shows the hierarchical structure for Image Settings OSD menus.
Shows the hierarchical structure for Configuration OSD menus.
Shows the hierarchical structure for Power Management OSD menus.
Shows the hierarchical structure for Image Blending OSD menus.
Shows the hierarchical structure for Color Matching OSD menus.
Shows the hierarchical structure for Lamp OSD menus.
Shows the hierarchical structure for Input Switching & PIP OSD menus.
Lists preset mode settings for various display conditions.
Shows preset values for different signal types and modes.
To Next Page
