How to fix Christie DHD700-GS Projector when no image appears on screen?
If no image is appearing on the screen when using your Christie Projector, ensure all cables and power connections are correctly and securely connected. Also, verify that the projector is switched on.
What to do if Christie DHD700-GS Projector image is incorrectly displayed?
If the image is incorrectly displayed on your Christie Projector, try these steps: 1. If using a PC (Windows 95, 98, 2000, XP, Windows 7), press AUTO on the control panel or IR remote keypad. 2. Alternatively, go to My Computer > Control Panel > Display > Settings tab. 3. Verify your display resolution setting is lower than or equal to WUXGA (1920 × 1200). 4. Click Advanced Properties, then the Monitor tab. 5. Click Change, then Show all devices. 6. Under the SP box, select Standard monitor types and choose the appropriate resolution mode under the Models box. 7. Ensure the monitor display's resolution setting is lower than or equal to WUXGA (1920 × 1200). If using a Notebook: 1. Press AUTO on the control panel or IR remote keypad. 2. Adjust the computer's resolution. 3. To se...
Limitations and exclusions for the product's limited warranty.
Guidance for resolving common issues with the projector.
Instructions for connecting the projector to a computer.
Steps to connect the projector for Christie Presenter use via Ethernet or WiFi.
Solutions for when the projector displays no image.
Troubleshooting steps for partial or distorted image display.
Compliance with electrical safety standards like CSA, UL, IEC, EN.
Compliance with laser safety standards like IEC and FDA CDRH.
General| Contrast Ratio | 4000:1 (Full On/Off) |
|---|---|
| Light Source | Laser Phosphor |
| Weight | 23.6 lbs (10.7 kg) |
| Lamp Life | 20, 000 hours to 50% brightness |
| Resolution | 1920 x 1080 |
| Input Connectors | HDMI, VGA, Component, Composite |
| Technology | 3-chip DLP |
To Next Page
