Need help?Do you have a question about the Christie DHD800 and is the answer not in the manual?
General| Resolution | 1920 x 1080 |
|---|---|
| Brightness | 8000 ANSI Lumens |
| Light Source | Lamp |
| Projection Technology | DLP |
| Contrast Ratio | 10000:1 |
| Lamp Life | 2000 hours (Standard), 3000 hours (Eco) |
| Input Connectors | HDMI, VGA, Composite |
| Noise Level | 39 dB (normal) |
| Power Consumption | 750 W (Typical) |
Discusses ventilation requirements and precautions for hot air exhaust.
Covers positioning precautions, ceiling mounting, and laser technology use.
Provides instructions and cautions for safely moving the projector.
Details requirements for the AC power cord and its proper use.
Identifies front/back panels, Kensington slot, and side controls/indicators.
Details all input/output terminals and their functions.
Identifies controls and indicators on the projector's side panel.
Explains the meaning of various indicator lights on the projector.
Details the functions of each button on the remote control.
Covers battery installation, receivers, range, and wired remote control.
Explains how to set and change remote control codes for interference prevention.
Covers lens installation, projector positioning, and picture level/pitch adjustment.
Details the motor-driven lens shift function for image positioning.
Explains the projector's terminal slots and ordering optional interface boards.
Diagrams and instructions for connecting various computer video outputs.
Guidance on connecting video sources, including signal tables.
Covers attaching cable ties and connecting the AC power cord.
Step-by-step guides for turning on, entering PIN, and turning off the projector.
Explains how to navigate and use the projector's on-screen menu system.
Details the main menu categories for computer and video sources.
Describes direct control functions and remote control operations.
How to display current operating conditions and signal information.
How to select input sources using side controls and remote buttons.
Steps to select computer input sources via DVI/D-sub and 5-BNC terminals.
Steps to select video input sources via Scart, HDMI, and Y/Pb/Cb/Pr/Cr terminals.
How to select computer system settings, including automatic and manual modes.
How to automatically adjust PC image fine sync, position, and dots.
Detailed steps for manually adjusting PC image parameters for optimal display.
Selecting image levels and adjusting screen size for computer inputs.
Correcting keystone distortion and using digital zoom for computer images.
How to select the video system (Auto, PAL, SECAM, NTSC) for video sources.
Selecting image levels and adjusting screen size for video inputs.
Details for adjusting Contrast, Brightness, Color, Tint, and Color Management.
Advanced settings for adjusting color levels, phase, and gamma.
Customizes menu language, position, size, and display options.
Settings for lamp mode, brightness control, lamp life, and interval.
Function to project two videos simultaneously in sub screens.
Functions for seamlessly overlapping projector images and correcting color differences.
Fine-tuning color settings using measured values and target values.
Configures HDMI signals and customizes screen logo with PIN lock.
Manages air filter, fan speed, remote codes, and RC sensor.
Controls power saving, lamp life, and automatic startup features.
Covers Key Lock and PIN Code Lock functions for projector security.
Manages shutter, video delay, and closed caption display features.
Adjusts frame lock frequency and manages the filter counter.
Resets all projector settings to factory defaults, excluding specific items.
Information on filter clogging, replacement icons, and cartridge installation.
Procedure to reset the filter and scroll counters after cartridge replacement.
Monitors lamp status, controls lamp mode, and guides lamp replacement.
Important safety precautions regarding the handling and potential hazards of projector lamps.
Instructions for replacing the projector's color wheels.
Guidance on cleaning the projector's lens and exterior cabinet.
Explains projector conditions indicated by warning lights and indicators.
Provides solutions for common projector problems and issues.
Visual representation of the projector's menu structure and options.
Maps indicator states to specific projector conditions and troubleshooting steps.
Lists supported computer resolutions, H-freq, and V-freq.
Details optional board signals and Picture in Picture combinations.
Provides detailed technical data on projector features and capabilities.
Lists optional parts and shows pin configurations for projector terminals.
Space for PIN codes and physical dimensions of the projector.
Guides for using edge blending and color matching for multi-screen displays.
To Next Page
