What to do if my Christie LWU900-DS Projector powers off and on when connected to the network?
If your Christie Projector powers off and on when connected to the network, disconnect the LAN cable and check if the projector works properly. If the issue occurs after connecting to the network, there may be a loop between two Ethernet switching hubs within the network.
What to do if image positions shift on my Christie LWU900-DS Projector?
If the image positions of your Christie Projector are shifted due to temperature change, vibration, or shock, readjust the images. To prevent this, install the projectors in a stable environment when using Instant Stack.
Why Christie Projector images do not superimpose well?
Images from your Christie Projector may not superimpose well enough especially when the screen is slanted, deformed, or the surface is uneven, depending on the installation and surrounding environment.
What to do if my Christie Projector shows smoke or emits a strange odor?
If your Christie Projector is emitting smoke, a strange odor, excessive sound, or if you notice damaged components or penetration of foreign materials, immediately disconnect the power plug from the outlet. After ensuring the smoke or odor has stopped, contact your dealer or a service company for assistance.
What to do if there is a note of precaution when cleaning the air filter of my Christie Projector?
If there's a note of precaution when cleaning the air filter of your Christie Projector, immediately turn the power off. Clean or change the air filter. After you have cleaned or changed the air filter, reset the filter hours.
How to increase brightness on Christie LWU900-DS?
If the brightness is set too low on your Christie Projector, use the menu function to adjust the BRIGHTNESS to a higher level.
How to fix mismatched input changeover settings on my Christie Projector?
If the input changeover settings are mismatched on your Christie Projector, select the correct input signal and adjust the settings accordingly.
How to disable AV MUTE function on Christie LWU900-DS Projector?
If the AV MUTE function is active on your Christie Projector, press the AV MUTE button on the remote control to deactivate it.
What to do if lens shift does not work correctly on my Christie LWU900-DS?
If the lens shift on your Christie Projector isn't working correctly, turn off the projector and ensure the lens unit is correctly installed. Also, check for and remove any obstacles around the lens. If the issue persists, contact your dealer or a service company.
What to do if my Christie LWU900-DS Projector is waiting for an image file?
If your Christie Projector is waiting for an image file, check the hardware connection, the projector's settings, and network-related settings. The computer-projector network connection might be disconnected, so try reconnecting them.
General| Resolution | WUXGA (1920 x 1200) |
|---|---|
| Light Source | Laser Phosphor |
| Light Source Life | 20, 000 hours |
| Input Ports | HDMI, DisplayPort |
| Projection Lens | Optional |
| Operating Temperature | 5 - 40°C |
| Lens Options | Optional lenses available |
| Throw Ratio | Depending on lens option |
To Next Page
