How do I fix flickering or stripes on my Christie LW401 Projector screen?
If you're seeing image degradation such as flickering or stripes on your Christie Projector screen, and the OVER SCAN ratio is too big, adjust OVER SCAN in the IMAGE menu to a smaller value.
How do I resolve no picture on my Christie LW401 due to incorrect signal cable connections?
If your Christie Projector displays no picture, ensure that all connection cables are correctly and securely connected.
How do I fix sound issues on my Christie Projector due to incorrect cable connections?
If there is no sound coming from your Christie Projector, check that the audio cables are correctly connected.
What should I do if the lamp in my Christie LW401 Projector doesn't light and it feels hot?
If the lamp in your Christie Projector doesn't light and the interior feels heated, turn the power off and allow the projector to cool down for at least 20 minutes. Afterward, check the air passage aperture, air filter, and peripheral temperature.
Why doesn't my Christie LW401 Projector recognize my USB drive?
If your Christie Projector doesn't recognize the USB storage device inserted into the USB TYPE A ports, use the REMOVE USB function first, remove the USB storage device, and then insert it into the port again.
How to fix faded or poor colors on Christie LW401 Projector?
If the colors on your Christie Projector appear faded or the color tone is poor, adjust the COLOR TEMP, COLOR, and/or TINT settings using the menu functions.
Why are the pictures on my Christie LW401 Projector dark in Eco mode?
If the pictures on your Christie Projector appear dark, and it is operating in Eco mode, set ECO MODE to NORMAL, and set AUTO ECO MODE to OFF in the SETUP menu.
How do I fix blurry pictures on my Christie LW401?
If the pictures on your Christie Projector appear blurry, adjust the focus and/or horizontal phase settings.
What should I do when my Christie LW401 Projector indicates it's time to clean the air filter?
If your Christie Projector indicates it's time to clean the air filter, immediately turn the power off, and clean or change the air filter. After cleaning or changing it, be sure to reset the filter timer.
What to do if the lamp cover on my Christie LW401 isn't properly fixed?
If the lamp cover on your Christie Projector hasn't been properly fixed, turn the power off and allow the projector to cool down for at least 45 minutes. After it has cooled down sufficiently, confirm the attachment state of the lamp cover.
General| Native aspect ratio | 16:9 |
|---|---|
| Projection distance | - m |
| Projection technology | LCD |
| Contrast ratio (typical) | 3000:1 |
| Screen size compatibility | - \ |
| Projector native resolution | WXGA (1280x800) |
| Vertical synchronization (max) | 120 kHz |
| Vertical synchronization (min) | 56 kHz |
| Horizontal synchronization (max) | 106 kHz |
| Horizontal synchronization (min) | 15 kHz |
| Lamp type | UHP |
| Lamp power | 245 W |
| Lamps quantity | 1 lamp(s) |
| Light source type | Lamp |
| Service life of light source | 2500 h |
| Service life of light source (economic mode) | 4000 h |
| Focus | Auto |
| Zoom capability | Yes |
| Focal length range | - mm |
| 3D | - |
| Supported video modes | 480i, 480p, 576i, 720p, 1080i, 1080p |
| Analog signal format system | NTSC, NTSC 4.43, PAL, PAL M, PAL N, SECAM |
| Supported graphics resolutions | 640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 768 (WXGA), 1280 x 800 (WXGA), 1360 x 768 (WXGA), 1440 x 900 (WXGA+), 1600 x 1200 (UXGA) |
| Audio (L/R) in | 1 |
| BNC input ports | 5 |
| HDMI connector type | Full-size |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | 3 |
| Wi-Fi | No |
| Noise level | 35 dB |
| Certification | EMC, FCC, Part 15, Subpart B, Class A, EN55022/CISPR22 Class A, EN55024 / CISPR24, IEC 60950-1, UL 60950-1, CAN/CSA C22.2 No. 60950-1, Directive (EC) 2002/95/EC (RoHS), Directive 2002/96/EC (WEEE), EU Regulation (EC) No. 1907/2006 (REACH), Certifications marks (check with Christie for latest update): cULus (Canada and the US), CE (EU), CCC (China), GoST-R (Russia), C-Tick (Australia and New Zealand), South Africa |
| Noise level (economic mode) | 29 dB |
| RMS rated power | 16 W |
| Placement | Desktop |
| Product type | Standard throw projector |
| Product color | White |
| Power source | AC |
| Power consumption (standby) | - W |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 85 % |
| Sustainability certificates | RoHS |
| Cables included | AC, HDMI-DVI |
Weight and Dimensions| Depth | 476 mm |
|---|---|
| Width | 498 mm |
| Height | 147 mm |
| Weight | 8500 g |
| Package depth | 683 mm |
| Package width | 552 mm |
| Package height | 229 mm |
| Package weight | 12300 g |
Guides on the proper placement and installation of the projector.
Instructions for connecting various external devices to the projector.
Instructions for adjusting zoom, focus, and lens position for optimal image.
Configuration options for connecting the projector to a network.
Step-by-step guide for safely replacing the projector lamp.
To Next Page
