How to fix Christie DWU630-GS when no image appears on the screen?
If no image is showing on your Christie Projector, verify that all cables and power connections are correctly and securely connected. Also, check if the Light Status LED is green and ensure that you have removed the lens cap and the projector is switched on.
What to do if the image is out of focus on my Christie DWU630-GS?
If the image on your Christie Projector is out of focus, first ensure that both front and back lens caps are removed. Then, adjust the lens focus until the image fits the screen. Also, verify that the projection screen is within the required distance for optimal focus.
How to correct an incorrectly displayed image on a Christie DWU630-GS Projector?
If the image on your Christie Projector is displayed incorrectly, try the following: 1. Press AUTO on the control panel or IR remote. 2. Ensure your display resolution setting is lower than or equal to WUXGA (1920 × 1200). 3. If using a Notebook, press AUTO. 4. Adjust the resolution of the computer. 5. Restart all equipment including the projector.
How to adjust image size on a Christie DWU630-GS?
If the image size is incorrect on your Christie Projector, adjust the lens zoom to fit the screen. Verify that you are using the correct lens for your setup. If needed, change the position of the projector to achieve the desired image size.
How to fix a stretched image on a Christie Projector?
If the image on your Christie Projector appears stretched, and you are playing 4:3 format DVD titles, change the format to 4:3 in the projector's on-screen display. If the image is still stretched, adjust the aspect ratio by setting the display format as 16:9 (wide) on your DVD player.
What to do if Christie Projector connection fails with a new IP address?
If the connection fails with a new IP address on your Christie Projector, ensure the RJ45 cable is correctly and securely connected to both the projector and the network device. Make sure the IP address of the projector and the controlling device are set to the same region with different IP addresses. Try connecting the projector directly to the computer to check the network environment. Also, ensure every device has a unique IP address.
How to resolve a vertical flickering bar on a Christie DWU630-GS?
If you observe a vertical flickering bar on your Christie Projector, use Auto Image to make an adjustment. Also, check and reconfigure the display mode of your graphic card to ensure it is compatible with the projector.
Information on copyright, trademarks, and brand names.
Details on accuracy, changes, performance specifications, and warranty limitations.
Covers damage not included in Christie's standard limited warranty.
Importance of maintenance for warranty and product operation.
FCC rules, Canadian standards, and environmental disposal guidelines.
Essential warnings and precautions for safe projector operation and handling.
Class 1 Laser Product warnings and precautions for eye safety.
Identification of front, rear, left, and right projector components.
Overview of the built-in keypad, I/O panel, and IR remote control.
Explanation of the LED status indicators: Light, Status, and Picture Mute LEDs.
Guidance on connecting to computers and video equipment using various cables.
Steps for powering on/off, adjusting position, and calculating lens offset.
Instructions for removing/installing the lens and mounting the projector.
How to access and navigate projector menus using OSD and controls.
Adjusting image parameters like brightness, contrast, color, and geometry.
Settings for language, LAN, options, light source, and network.
Accessing the web interface and viewing projector status and information.
Resolving problems with no image, incorrect display, flickering, or connection failures.
Addressing issues with image size, stretching, and resolution settings.
Details on supported inputs, PIP/PBP, key features, and components.
Projector dimensions, operating environment, power, and compliance information.
Structured breakdown of the projector's on-screen menu options.
General| Matrix size | 0.67 \ |
|---|---|
| Matrix type | DMD |
| Native aspect ratio | 16:10 |
| Projection distance | - m |
| Vertical scan range | 24 - 120 Hz |
| Horizontal scan range | 15 - 91 kHz |
| Projection technology | DLP |
| Contrast ratio (dynamic) | 6000:1 |
| Contrast ratio (typical) | 1200:1 |
| Screen size compatibility | - \ |
| Projector native resolution | WUXGA (1920x1200) |
| Light source type | LED |
| Service life of light source | 20000 h |
| HDMI version | 1.4 |
| HDMI ports quantity | 3 |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | 0 |
| Component video (YPbPr/YCbCr) in | - |
| Placement | Desktop |
| Product type | Standard throw projector |
| Product color | White |
| Market positioning | Business |
| Supported 3D formats | Frame packing, Side by side, Top and bottom |
| Supported graphics resolutions | 640 x 480 (VGA), 1920 x 1200 (WUXGA) |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 / 60 Hz |
| Power consumption (standby) | - W |
| Power consumption (typical) | 650 W |
| Focal length range | - mm |
| Remote control type | IR |
| Noise level | 36 dB |
| Certification | UL/CSA/IEC 60950-1, FCC Class A, CE, FDA, CCC, KC, PSE, CU, SABS, BIS, VCCI, RCM, Ukr, TER, SASO REACH, WEEE |
| Noise level (economic mode) | 34 dB |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 0 - 85 % |
| Sustainability certificates | RoHS |
Weight and Dimensions| Depth | 505 mm |
|---|---|
| Width | 456 mm |
| Height | 190 mm |
| Weight | 15850 g |
| Package depth | 626 mm |
| Package width | 596 mm |
| Package height | 349 mm |
| Package weight | 21350 g |
To Next Page
