What should I do if my Christie Projector won't turn on because the lamp or lamp cover isn't properly fixed?
If your Christie Projector doesn't turn on because the lamp/lamp cover isn't properly fixed, turn the power off, disconnect the power plug, and allow the projector to cool down for at least 45 minutes. After cooling down, confirm the attachment state of the lamp and lamp cover.
What to do if my Christie Projector is operating abnormally?
If your Christie Projector starts operating abnormally, stop using it immediately and disconnect the power plug from the outlet. Then, contact your dealer or a service company for assistance.
How do I resolve no picture on my Christie Projector due to incorrect signal cable connections?
If your Christie Projector displays no picture, ensure that all connection cables are correctly and securely connected.
How do I fix sound issues on my Christie Projector due to incorrect cable connections?
If there is no sound coming from your Christie Projector, check that the audio cables are correctly connected.
Why doesn't my Christie LX601i recognize my USB drive?
If your Christie Projector doesn't recognize the USB storage device inserted into the USB TYPE A ports, use the REMOVE USB function first, remove the USB storage device, and then insert it into the port again.
What to do if my Christie Projector becomes overcooled?
If your Christie Projector becomes overcooled, use the unit within the usage temperature parameters (0°C to 40°C). After treatment, reset the power to ON.
How do I fix mismatched input changeover settings on my Christie LX601i?
If your Christie Projector outputs neither sounds nor pictures due to mismatched input changeover settings, select the correct input signal and adjust the settings accordingly.
How to fix faded or poor colors on Christie Projector?
If the colors on your Christie Projector appear faded or the color tone is poor, adjust the COLOR TEMP, COLOR, and/or TINT settings using the menu functions.
What to do if the lamp cover on my Christie LX601i isn't properly fixed?
If the lamp cover on your Christie Projector hasn't been properly fixed, turn the power off and allow the projector to cool down for at least 45 minutes. After it has cooled down sufficiently, confirm the attachment state of the lamp cover.
Why are the pictures on my Christie LX601i Projector too dark?
If the pictures on your Christie Projector appear dark, adjust the BRIGHTNESS and/or CONTRAST settings to a higher level using the menu function.
To Next Page
General
