Need help?Do you have a question about the Christie M Series and is the answer not in the manual?
Guidance on correctly replacing projector modules and using approved parts.
Safety precautions for servicing energized Christie equipment.
Essential safety precautions to prevent injury and equipment damage.
Critical warnings regarding potential death or serious injury if precautions are not followed.
Warnings related to electrical hazards and proper power connection.
Safety warnings for handling projector lamps due to explosion and injury risks.
Guidelines for maintaining component cleanliness during service procedures.
Specific instructions and preventative measures for cleaning components.
Importance of maintaining cooling system to prevent overheating and ensure reliability.
Safety and warning guidelines for handling power cords and attachments.
Guidelines for maintaining optical components, emphasizing caution.
Procedures for cleaning optics, highlighting risks and when to perform cleaning.
Step-by-step instructions for cleaning dust from the projector lens.
Procedures for cleaning smudges and oil from the projector lens.
Procedure to adjust lens mount tilt for screen-to-projector tilt compensation.
Explains convergence issues and requirements for adjustment.
Step-by-step guide to remove the light engine cover for convergence adjustment.
Information about fold mirror adjustment screws and misalignment issues.
Procedure to adjust the integrator tilt using a hex driver.
Procedure for adjusting the integrator focus lens by loosening setscrews.
General guidelines to follow before starting troubleshooting procedures.
Explains the normal power-up sequence and status indicator meanings.
Procedure to retrieve diagnostic files via a web browser.
Troubleshooting tips if the error log file download window does not appear.
Instructions for emailing error logs to Christie technical support with required information.
List of LCD error messages, conditions, and recommended actions.
Details Critical Hardware Fault errors and provides a flowchart for diagnosis.
General tasks to perform before servicing the projector.
Procedure to install new projector lamps, including safety warnings.
Procedure to install the light engine, including cable routing.
To Next Page
General