EasyManua.ls Logo

Christie WX10K-M User Manual

Christie WX10K-M
95 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Service Guide
020-100551-11
M Series

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Christie WX10K-M and is the answer not in the manual?

Christie WX10K-M Specifications

General IconGeneral
Brightness10, 000 ANSI Lumens
ResolutionWUXGA (1920 x 1200)
Dimensions520mm x 292mm x 700mm
Lens OptionsInterchangeable lenses
InputsHDMI, VGA, 3G-SDI

Summary

Service guidelines

Servicing live equipment

Safety precautions for servicing energized projector components.

General safety warnings

Crucial safety precautions to avoid death, serious injury, or equipment damage.

AC/Power precautions

Safety measures related to the AC power supply and connections.

Lamp precautions

Safety measures and warnings when handling projector lamps.

Service setups

Aligning the boresight

Procedure to adjust lens mount tilt for compensating screen-to-projector tilt.

Adjusting convergence

Steps to adjust the red, green, and blue color alignment for precise overlap.

Troubleshooting

Troubleshooting guidelines

General steps and precautions before performing troubleshooting procedures.

Obtaining an error log

Procedure for retrieving diagnostic error logs from the projector.

LCD error messages

List of LCD error messages, their conditions, and recommended actions.

Critical Hardware Fault errors

Troubleshooting guide for Critical Hardware Fault - 12C Thermal Device errors.

Filtration

Replacing the dust air filter

Procedure for replacing the projector's dust air filter.

Replacing the fog oil filter

Procedure for replacing the projector's fog oil filter.

Electronics

Removing the card cage lid

Steps to remove the lid of the card cage assembly.

Removing the card cage plate (shield)

Procedure to remove the card cage plate or shield.

Removing the panel driver

Procedure to remove the panel driver board.

Optics

Removing the lamps

Procedure for safely removing projector lamps.

Printed circuit boards and sensors

Related product manuals