Need help?Do you have a question about the Christie CP2000-XB and is the answer not in the manual?
Step-by-step guide for basic projector setup, including positioning and connections.
Detailed steps for installing the projector lens, lamp, and ensuring proper cooling system setup.
Configuring the ballast for incoming AC power and connecting it to the projector.
Setting lamp type, cable length, and initial projector power-up sequence.
Initial optical alignment for image geometry and focus before boresight adjustments.
Adjusting lens offset and boresight for precise image alignment.
Step-by-step guide for powering up the projector system, including lamp ignition.
Detailed steps for safely replacing the projector lamp, including safety precautions and post-replacement checks.
Solutions for common lamp problems like failure to ignite, sudden shut-off, or no current reading.
Step-by-step guide for basic projector setup, including positioning and connections.
Detailed steps for installing the projector lens, lamp, and ensuring proper cooling system setup.
Configuring the ballast for incoming AC power and connecting it to the projector.
Setting lamp type, cable length, and initial projector power-up sequence.
Initial optical alignment for image geometry and focus before boresight adjustments.
Adjusting lens offset and boresight for precise image alignment.
Step-by-step guide for powering up the projector system, including lamp ignition.
Detailed steps for safely replacing the projector lamp, including safety precautions and post-replacement checks.
Solutions for common lamp problems like failure to ignite, sudden shut-off, or no current reading.
General| Type | Digital Cinema Projector |
|---|---|
| Resolution | 2K (2048 x 1080) |
| Technology | DLP |
| Contrast Ratio | 2000:1 |
| Lamp Type | Xenon lamp |
| Input Connectors | DVI, HDMI, 3G-SDI |
| Projection Lens | Optional lenses available |
To Next Page
