Chroma 66202 - 3. Panel Description; 3.1 Front Panel Overview

Digital Power Meter 66201/66202 Quick Start Guide
3. Operation
3.1 Preparation before Test
(1) Before plugging in the power cord, make sure the power switch is off
and the voltage selector on the rear panel meets the required
voltage.
(2) If there is a need to change the voltage, ensure the fuse used
matches the voltage selected. See section 1.5 Fuse for the
specification.
WARNING
It is required to remove the power cord when replacing
the fuse or changing the input voltage to avoid the
hazard of electric shock.
3.2 Connecting Test Device
3.2.1 Standard Connection
66201/66202 Power Meter has two types of connection. Its
measurement theory is shown in Figure 3-1 (a) and (b).
AC
V
AC
UUT
Unit Under
Test
Power Meter
I
AC
V_drop
AC
I
AC
UUT
Unit Under
Test
Power Meter
A_leakage
V
AC
(a) (b)
Figure 3-1 Measurement Theory for Power Meter Connection
10