Using Remote Control
5-43
Query syntax: COMParator:LIMit:PF?[<space><MAX | MIN>]<PMT>
Return parameters: <NR2> , -1 ~ 9.999
Header on: :COMPARATOR:LIMIT:PF<space><NR2>,<NR2><RMT>
Header off: <NR2>,<NR2><RMT>
Separator 0: <NR2>,<NR2><RMT>
Separator 1: <NR2>;<NR2><RMT>
Example: none
[CALCulate:]COMParator:LIMit:VA
Type: Channel-Specific.
Description: This command sets upper and lower boundaries of apparent power
in GONG mode.
Setting syntax: COMParator:LIMit:VA<space><NR2>,<NR2><PMT>
Setting parameters: <NR2>, -1 ~ 99999.9999, -1 denote don’t care.
Query syntax: COMParator:LIMit:VA?[<space><MAX | MIN>]<PMT>
Return parameters: <NR2> , -1 ~ 99999.9999
Header on: :COMPARATOR:LIMIT:VA<space><NR2>,<NR2><RMT>
Header off: <NR2>,<NR2><RMT>
Separator 0: <NR2>,<NR2><RMT>
Separator 1: <NR2>;<NR2><RMT>
Example: none
[CALCulate:]COMParator:LIMit:VAR
Type: Channel-Specific.
Description: This command sets upper and lower boundaries of reactive power
in GONG mode.
Setting syntax: COMParator:LIMit:VAR<space><NR2>,<NR2><PMT>
Setting parameters: <NR2>, -1 ~ 99999.9999, -1 denote don’t care.
Query syntax: COMParator:LIMit:VAR?[<space><MAX | MIN>]<PMT>
Return parameters: <NR2> , -1 ~ 99999.9999
Header on: :COMPARATOR:LIMIT:VAR<space><NR2>,<NR2><RMT>
Header off: <NR2>,<NR2><RMT>
Separator 0: <NR2>,<NR2><RMT>
Separator 1: <NR2>;<NR2><RMT>
Example: none
[CALCulate:]COMParator:LIMit:FREQ
Type: Channel-Specific.
Description: This command sets upper and lower boundaries of frequency in
GONG mode.
Setting syntax: COMParator:LIMit:FREQ<space><NR2>,<NR2><PMT>
Setting parameters: <NR2>, -1 ~ 99999.9999, -1 denote don’t care.
Query syntax: COMParator:LIMit:FREQ?[<space><MAX | MIN>]<PMT>
Return parameters: <NR2> , -1 ~ 99999.9999
Header on: :COMPARATOR:LIMIT:FREQ<space><NR2>,<NR2><RMT>
Header off: <NR2>,<NR2><RMT>
Separator 0: <NR2>,<NR2><RMT>
Separator 1: <NR2>;<NR2><RMT>
Example: none