Page | 92
UTILITIES SCREEN – MAIN [CONTINUED]
Ask Before
Discarding
Unsaved Video
in RAM
Select for warnings about overwriting video stored in memory. When the Record
button is pressed, the warning manifests as a pop-up titled ‘Unsaved Video in
RAM’. Selecting OK continues while Cancel prevents new video from being
recorded so that the previous recording can be saved via the Play screen.
One of three options can be set:
Always: Prompts before starting a recording.
If Not Reviewed: Prompts when a new recording is started, but only when the
previous recording was not opened in the Play screen.
Never: Disables the prompt entirely.
Useful in cases where the camera’s power button is in a location that is not
easily accessible during filming, this feature can configure the power
management system in the camera to power on when AC power is applied,
power off when AC power is removed, or both.
Please note: If the power button is pressed to turn the camera off while the Turn
on if AC inserted option is enabled, the camera will reboot instead of shutting
down.
When a recording ends, the camera automatically saves the entire recording to
an external storage device. If Auto Record is selected as well, the camera will
record and save in a continuous loop, which can be interrupted by tapping any
of the Main screen buttons (except for Focus Aid or Record) and then choosing
to stop the recording.
Prior to enabling Auto Save, set a save location manually in Save Settings. It is
not necessary to set a filename, as videos will be named automatically with the
date and time upon saving.
Enables a Play button in the bottom-right corner of the Play screen which will
play through the marked region without the need to press and hold the frame
forward or frame backward button.
Automatically starts a recording after the camera has booted and as long as it is
not currently saving video to an external storage device.
To Next Page
Loading...
