TEST ACTION APPLICABILITY
13 Turn the ignition off.
Visually inspect the related wiring harness. Look for any chafed, pierced, pinched, or
partially broken wires.
Visually inspect the related wire harness connectors. Look for broken, bent, pushed
out, or corroded terminals.
Refer to any Hotline letters or Technical Service Bulletins that may apply.
Were any problems found?
All
Yes → Repair as necessary.
Perform ABS VERIFICATION TEST - VER 1.
No → Test Complete.
21
BRAKES (CAB)
LEFT FRONT SENSOR CIRCUIT FAILURE — Continued
ProCarManuals.com
To Next Page
Loading...
