Maintenance Manual 10
PEFS F3 Maintenance Manual, Version 1.2, Feb 2018
© Copyright 2017 Chubb Fire & Security Pty Ltd
Recommended Tool List
The following tool list is provided as a guide only.
PEFS F3 Tools
Nozzle Cap Removal Tool - Tee Handle
Nozzle Cap Removal Tool - Socket
Recommended Common Tools
Tape measure (5m minimum)
Portable tube bender (to suit 12.7mm OD tube)
Flaring tool - 37° (to suit 12.7mm OD tube)
Hand / Drill type deburring tool 2-14mm
Drill (Heavy duty) - 12.7 mm chuck
Drill Set 1mm - 13mm x 0.5mm (high speed)
Socket set - metric 4mm - 19mm, A/F 3/16” - 15/16”
Spanner Set - metric 7mm - 22mm, A/F 1/4" - 1”
Adjustable Spanners 250mm & 450mm
Files - Round and Flat (medium bastard) 250mm
Hex Wrench set (Allen keys) Metric & Imperial
Pliers (combination) 225mm
Loctite 577 pipe thread sealant or Loctite 569 hydraulic thread sealant
Molykote 111 lubricant or equivalent silicon based o-ring lubricant.
Loctite C5-A Anti-Seize Lubricant
Table 1 – Recommended Tool List
To Next Page
Loading...
Need help?
General