Need help?Do you have a question about the CIAT HYDROCIAT 1800BX and is the answer not in the manual?
Adhere to manual, regulations, qualified personnel, and disconnect switch before work.
Notes on power factor correction and protection against overvoltage/lightning.
Describes the XTRACONNECT 2 microprocessor module and its main functions.
Explains how safety devices are managed, triggered, and reset.
Details pressure sensors, switches, and evaporator frost protection mechanisms.
Covers water circulation control and internal compressor protection features.
Essential checks before system start-up, including diagrams, components, and guards.
Steps for system start-up, bleeding air, setting parameters, and applying thermal load.
Procedure for starting the unit, managing faults, and turning it off.
Key checks including compressor rotation, pressures, safety devices, and oil level.
How to check and adjust refrigerant charge using overheating and subcooling.
General advice for troubleshooting, focusing on common causes like fouling and fluid issues.
Troubleshooting steps for low suction pressure and excessive discharge pressure.
Addresses high discharge temperature, oil pressure, oil level, and moisture indicator.
Resolves issues with high fluid outlet temperature and insufficient discharge temperature.
To Next Page
General