CIAT LJ 150 - User Manual

ciatcooler d'eau glacée
Packaged water chiller
Notice d’utilisation
User’s brochure
10 - 1996
N 94.47 A
condensation par air
Installation
Fonctionnement
Mise en service
Maintenance
Groupes de production
with air cooled condenser
LJ
Installation
Operation
Commissioning
Maintenance
Библиотека СОК 

Summary

Guarantee

Warning

Installation Precautions

Mounting and Installation

Connections

Surveillance and Control Electronic Module

Control

Verifications Before Putting into Operation

Control and Safety Devices

Low Pressure Pressostats (LP)

Safety device monitoring low side refrigerant pressure.

High Pressure Pressostats (HP)

Safety device monitoring high side refrigerant pressure.

Evaporator Anti-frost Sensor

Protects evaporator from freezing by monitoring outlet temperature.

Evaporator Water Flow Switch

Ensures adequate water flow through the evaporator.

Putting into Operation

Starting Sequence

Step-by-step procedure for starting the unit.

In All Cases, Verify Immediately

Maintenance

Control and Safety Devices Setting

Chilled Water Inlet Temperature Sensor

Chilled Water Outlet Anti-frost Sensor

High Pressure Pressostat (Manual Reset)

Low Pressure Pressostat (Automatic)

Anti-short Cycle (MRS1-2.1)

Operating Check List

CIAT LJ 150 Specifications