12
Ceramic
We recommend regular cleaning
with a damp cloth. For stubborn
marks or stains use a small amount
of a mild abrasive cleanser such as
Jif
®
cream with a damp cloth.
Polymarble
We recommend regular cleaning with
a damp cloth, or warm soapy (a mild
detergent) water and a damp cloth.
Glass
Best practice is to clean glass with a small
amount of warm water and a ‘Micro’ cloth.
When nished, wipe dry with ‘Micro’ cloth.
Never use caustic chemicals, razor
blades, putty knives or abrasive pads as
they may damage the glass surface.
Mirrors
Care must be taken when cleaning glass
and mirror, we recommend clean, warm
water used with a ‘Micro’ (soft, lint-free)
cloth. Wring out all water before wiping
glass and mirror. Dry immediately with
a dry ‘Micro’ (soft, lint-free) cloth.
Do not use acid, alkali or abrasive cleaners
(including commercial mirror cleaners that
contain ammonia or vinegar) on the mirror
surface. Care should be taken to avoid
contacting mirror edges with any liquid.
CaesarStone
®
CaesarStone
®
is a 91%-95% quartz based
product that has properties to ensure ease
of maintenance and longevity of the surface.
CaesarStone
®
requires very
little maintenance to keep the
surface looking like new.
For everyday routine cleaning CaesarStone
®
recommend wiping the surface with
warm soapy water (a mild detergent)
and a damp cloth or alternatively use a
quality spray-and-wipe type cleaner.
Extra stubborn dried spills and stains
For removal of these or if you wish to give
your CaesarStone
®
top a thorough clean we
recommend CaesarStone
®
brand Cream
Cleanser and a 3M
™
Scotchbrite
™
Never
Scratch
™
All-Purpose Scrubber which can
be used without damaging the stone, or
alternatively apply with a soft damp cloth.
To remove adhered materials like nail polish,
rst scrape away the excess with a sharp
blade. If there are any grey metal marks on
the surface, a mild detergent will remove it.
CaesarStone
®
brand Cream
Cleanser is available online from
www.caesarstone.com.au
Polishing
As CaesarStone
®
is non-porous; it
will keep its lustrous gloss and ultra
smooth surface without polishing.
And it never needs sealing.
Tough? Yes. Indestructible? No.
As with any surface, CaesarStone
®
can
be permanently damaged by exposure
to strong chemicals and solvents that
undermine its physical properties.
Do not use products that contain
trichlorethane or methylene chloride,
such as paint removers or strippers.
Avoid any highly aggressive cleaning
agents like oven cleaner that
have high alkaline/pH levels.
Should the surface be accidentally
exposed to any of these damaging
products, rinse immediately with
water to neutralize the effect.
Corian
®
& Solid
Surface material
CIBO recommends wiping with a soapy
sponge, followed by rinsing to care for
Corian
®
and Solid Surface material.
Deep clean – Stubborn stains
For more stubborn stains you will need
to occasionally give your Solid Surface
material a more thorough clean and
refresh using a mild abrasive cleanser like
Gumption
®
paste cleanser, Jif
®
cream
cleanser or Ajax
®
cream or cleanser.
Firmly wipe the surface with a damp
sponge or cloth and the mild abrasive
cleanser using a wide circular motion.
Always nish by rinsing and wiping your
surface with a damp cloth or sponge.
The Vileda
®
range of cloths and non-
scratch scourers are recommended.
Light marks and scuffs
Most light marks and scuffs may
be removed by wiping your surface
rmly with a damp sponge or cloth
and a mild abrasive cleanser.
Please be aware, using abrasive
cleansers on your Solid Surface material
may change your sheen level.
By routinely cleaning the entire
surface consistency in sheen
should return over time.
Cabinets
As cabinets may have a variety of
different nishes, the most universal
method of cleaning is to use a damp
cotton cloth and a mild detergent.
Never use an ammonia-based product or
any kind of abrasive cleaning product.
Product Care & Maintenance - Basins, Tops & Cabinets
IMPORTANT NOTES
Damage may occur if the products are
constantly exposed to water. Silicone must be
used to seal all joins – tops, cabinet sides and
kickboards must be sealed to prevent water
penetration and ultimately, damage.
It is the responsibility of the
purchaser to ensure the product
is installed and maintained
appropriately.
To Previous Page
Loading...