Vanity Unit Type A
Door Removal/Replacement (responsibility of the installer)
4
To Remove Doors
Locate button at back of top hinge and
press. Hold base of door and pull forward
to disengage top hinge.
Repeat with bottom hinge.
To Replace Doors
Line up hinges with corresponding hinge
plates.
At base of hinge is a small metal rod that
must be lined up with cradle arms of
hinge-plate.
Once hinge is in place, push back of hinge
down towards the hinge-plate. Hinge will
snap down and engage.
Capped door hinge
During installation, it is
advisable to remove door(s)
from cabinet. To do this,
unclip all hinges on each door.
To Next Page
Loading...