EasyManua.ls Logo

Cibo Vanity Cabinet User Manual

Default Icon
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
©
CIBO Design Pty Ltd CIBO A4 Product Care Guide Feb 2016
Vanity, Shaving
& Linen Cabinet
Installation Instructions
Product Care Guide
Delivery / Pick-up & Installation
Please fully inspect your CIBO Design product within 24 hours of
delivery (or pick up), prior to installation.
Vanities, basins, tops with integrated basins, waterplanes, baths and
tapware must be installed by a Licensed Plumber.
If you believe the product is defective after inspecting it, do not proceed
with installation – contact your place of purchase as soon as possible to
advise of the issue.
Question and Answer IconNeed help?

Do you have a question about the Cibo Vanity Cabinet and is the answer not in the manual?

Cibo Vanity Cabinet Specifications

General IconGeneral
BrandCibo
ModelVanity Cabinet
CategoryIndoor Furnishing
LanguageEnglish

Summary

Product Delivery and Installation Procedures

Delivery Inspection and Handling

Inspect CIBO Design products within 24 hours of delivery or pick-up prior to installation.

Vanity Unit Installation Steps

Unit Preparation and Positioning

Remove components, drill holes, move, and level the cabinet before wall fastening.

Wall Mounting and Securing

Fasten the vanity to the wall, ensuring it is level and correctly supported.

Sealing and Plumbing Connections

Seal the unit against the wall with silicone and connect plumbing.

Critical Installation Requirements

Notes on material limits, wall-hung fixing, kickboard fit, and tiling prohibitions.

Vanity Unit Type A: Drawer and Door Procedures

Drawer Removal and Replacement (Blumotion™)

Step-by-step guide for removing and reinstalling Blumotion™ drawers.

Drawer Front Adjustment

Adjusting drawer fronts for proper alignment using runner clips.

Vanity Unit Type A: Door Procedures

Door Removal and Replacement

Instructions for detaching and reattaching cabinet doors using hinges.

Door Hinge Alignment Adjustment

Fine-tuning door alignment by adjusting hinge screws.

Vanity Unit Type B: Drawer and Door Procedures

Drawer Removal and Replacement

Guide for removing and reinstalling Type B drawers.

Drawer Front Alignment

Adjusting drawer fronts for proper alignment.

Vanity Unit Type B: Door Procedures

Door Removal and Replacement

Instructions for detaching and reattaching 'uncapped' cabinet doors.

Door Hinge Alignment Adjustment

Adjusting door alignment using hinge screws.

Vanity Unit Type D: Drawer Procedures

Drawer Removal and Replacement

Procedure for removing non-soft closing drawers by lifting.

Frequently Asked Questions (FAQs)

Door and Drawer Alignment Issues

Troubleshooting for doors and drawers not lining up correctly.

Drawer Closing Problems

Diagnosing and fixing issues with drawers not closing properly.

Cabinet Twisting and Alignment

Addressing cabinet twisting due to uneven walls and its effect on alignment.

Cabinet Installation and Care

Shaving Cabinet Installation

Instructions for installing shaving cabinets, including sealing.

Linen Cabinet Installation

Instructions for installing linen cabinets, including sealing.

Important Notes for Cabinets

Notes on material properties and the importance of accurate sealing.

Product Care and Maintenance

Cleaning Recommendations

Guidelines for cleaning Ceramic, Polymarble, Glass, Mirrors, and Cabinets.

CaesarStone® Surface Care

Maintenance and cleaning advice for CaesarStone® surfaces.

Corian® & Solid Surface Care

Deep cleaning and maintenance for Corian® and Solid Surface materials.

General Maintenance Precautions

Important notes on water exposure, sealing joins, and avoiding damaging products.