Cibo Vanity Cabinet - Vanity Unit Type B: Drawer and Door Procedures; Drawer Removal and Replacement; Drawer Front Alignment

Vanity Unit Type B
Drawer Removal (before installation)
7
1 A Pull out the drawer.
B Take the CIBO caps off both sides.
C Locate release levers on both sides.
click
A
B
C
3 Lift and slide out the whole drawer.
click
A
B
C
2 With tip of your nger, lift the release
levers on both sides at the same time.
click
A
B
C
Drawer Replacement
1 Insert the drawer back on the
runner – when you hear a “click” it
has been connected.
2 Replace the CIBO caps.
click
A
B
C
Drawer Front Alignment (responsibility of the installer)
1 Adjustment point for drawer
front alignment if required.
click
A
B
C
Drawer runner - Type B