INTRODUCTION
These notes are provided to our Customer in order to offer the information’s necessary for the correct installation ,
operation use and maintenance of the unit purchased. Only technical staff, previously authorized by the Producer,
will guarantee a correct service of the machine and its components.
Any modification or repair made without prior CIMO authorization and agreement, will immediately cancel warrenty
conditions and this circumstance will save the producer from any kind of responsibility forward any person and things
suffering damages that might occur. Please carefully read the instructions notes before operating the machine.
CIMO is reserving the right to modify its products without previous notice.
WARRANTY
CIMO PRODUCTS ARE COVERED BY TWELVE MONTHS WARRANTY
STARTING FROM THE DELIVERY DATE TO CUSTOMER
EXCEPT ELECTRIC AND ELECTRONIC COMPONENTS THAT ARE COVERED SIX MONTHS ONLY.
WARRANTY IS LIMITED TO REPAIR OR CHANGE OF THE FAULT PARTS
UPON A PREVIOUS AUTHORIZATION AND INSPECTION BY OUR STAFF OR CIMO DELEGATE.
LABOUR, TRANSPORT, CUSTOMS AND OTHER COSTS WILL BE AT TOTAL CUSTOMER CHARGE.
THE TOTAL CHANGE OF THE COMPLETE MACHINE IS ALWAYS TO BE ESCLUDED FROM WARRANTY
CONDITIONS. PARTS REPAIRED OR CHANGED WILL NOT EXTEND THE WARRANTY PERIOD.
GENERAL NOTES
St. Louis vacuum mixers are machines studied and designed for the investment mixing and flask mold filling for the
lost wax casting of the jewelry making process. The main concept of the St.Louis mixing units is the total operativity
under vacuum situation.
Traditionally investment was mixed with water in open air and with this process the final blend result was not really
homogeneous and precise so the surface of the precious metal casted was not so smooth and complete.
More, the large quantity of gases incorporated in the mixing was giving such a huge percentage of porosity.
St.Louis mixer, with the vacuum total process and the timing, quantity and water dosing very precise, assures
the best quality performing results in one of the most delicate process-step by step of the lost wax casting system.
THE MACHINE FEATURES
- WATER DEGASIFICATION IN THE WATER DOSING-TANK
- TOTAL INVESTMENT POWDER DEGASIFICATION INTO THE MIXING CONTAINER
- EXACT AND PRECISE WATER QUANTITY IN THE RATIO 1:40 TO BE ADDED TO POWDER
- ADJUSTABLE MIXING SPEED AND ROTATION DIRECTION IN MIXING STEP
- CORRECT AND PRESETTED MIXING TIMING
- ADJUSTABLE INTENSITY VIBRATION FOR THE INVESTED FLASKS
OPERATOR SAFETY
PROTECTION MASK FOR OPERATOR IS COMPULSORY REQUESTED
PROTECTION HAND GLOVES FOR OPERATOR ARE SUGGESTED
THIS UNIT MUST BE OPERATED BY PROFESSIONAL STAFF
AND FOR ITS CONCEPT PURPOSE BUILT ONLY !
To Next Page
Loading...