- 6 -
• Do not strike the touch panel with a hard or pointed object, or press on the touch panel
with too much force, since it may damage the touch panel or the display.
• Do not install the Xpanel where the ambient temperature exceeds the allowed range.
Doing so may cause the Xpanel to malfunction or shorten product lifespan.
• Do not restrict or limit naturally occurring rear-face ventilation of the Xpanel, or storing or
using the Xpanel in an environment that is too hot.
• Do not use the Xpanel in areas where large, sudden temperature changes can occur.
These changes can cause condensation to form inside the unit, possibly causing the unit
to malfunction.
• Do not allow water, liquids, metal or charged particles to enter inside the Xpanel, since
they can cause either a Xpanel malfunction or an electrical shock.
• Do not store or use the Xpanel in direct sunlight, or in excessively dusty or dirty
environments.
• Do not store or use the Xpanel where strong jolting or excessive vibration can occur.
• Do not store or use the Xpanel where chemicals (such as organic solvents, etc.) and acids
can evaporate, or where chemicals and acids are present in the air.
• Do not use paint thinner or organic solvents to clean the Xpanel.
• Do not store or operate the LCD display in areas receiving direct sunlight, since the sun's
UV rays may cause the LCD display’s quality to deteriorate.
• After turning the Xpanel OFF, be sure to wait a few seconds before turning it ON again. If
the Xpanel started too soon, it may not start up correctly.
• Due to the possibility of unexpected accidents, you must back up the project data of the
Xpanel regularly.
General Safety Precautions
To Next Page
Loading...
