41
Chapter 3 System Menu
3.3.6 ECHO TEST
After a physical connection is established properly, run a test utility on your computer
and start the test on your Terminal. Select a desired baud rate if necessary.
To stop and exit the test, press [ESC].
Interface
Description Test Utility
USB This echo test is to verify connectivity via the USB cable
between the Terminal and a host computer.
USB VCOM Echo — The Terminal works as a generic
USB device.
EchoTest.exe for
Virtual COM
USB HID — The Terminal works as an input device;
select keyboard type and Caps Lock status for running a
test.
Any text editor for
HID
USB VCOM_CDC Echo — The Terminal works as a
generic USB device.
EchoTest.exe for
Virtual COM
3.3.7 VIBRATOR
Test the vibrator.
To stop and exit the test, press [ESC].
To Next Page
Loading...
