CipherLab 8200 Series - Upload

75
Chapter 4 Program Manager & Kernel
4.1.3 UPLOAD
You may duplicate one or all of the programs from the Terminal to a host computer or
another Terminal. This can be used to clone software on Terminals.
Note: To clone all of the programs, the target Terminal cannot have any other program
downloaded except the active one; that is, Memory Sectors 1 ~ 6 must be empty!
The procedures are similar to that for downloading programs.
 If the target is “Terminal”, the interface options “USB Virtual COM”, “SD Card” and
“USB Virtual COM_CDC” are unavailable.
 If the target is “PC”, the interface option “SD Card” is unavailable.
This screen is not available if you select
“2.All Programs” from the previous screen.