78
8200 Series Mobile Computer Reference Manual
4.2.2 KERNEL UPDATE
The kernel and bootloader might need to be updated to improve performance or due to
other considerations. Refer to Appendix I 錯誤! 找不到參照來源。
.
To download a kernel (K8200.shx) or bootloader (BL8200.shx) update, the procedure
is the same as that for downloading a program.
Any attempt to download an older version of bootloader will be rejected.
The system will restart itself right after downloading.
Warning: Do not turn off the Terminal while downloading a kernel update or
re-starting the Terminal. Otherwise, it will crash the kernel forever.
Note: The Terminal will stay in download mode for approximately 30 seconds.
.SHX Program Download one of the following firmware files:
Firmware File
Kernel update:
K8200.shx
Bootloader update:
BL8200.shx
SETTINGS
Interface
Options Description
USB VCOM Connect the USB cable between your computer and the Terminal.
Bluetooth Approach the target Bluetooth enabled device.
SD Card This option is available only when the memory card is present.
USB VCOM_CDC This option is available only when USB Virtual COM_CDC is in use.
Baud Rate
Available baud rate options: 115200/57600/38400/19200/9600 bps
To Next Page
Loading...
