94
Android Deployment Configurator User Guide
Make sure to click on “Apply ” to save your profile settings before closing this profile
detail window.
The followings are the brief introduction about the items on the profile detail window. For
completely description for all the setting items, please refer to
ReaderConfig User Guide for
Android.
Options on the Scanner Preferences page differ according to the reader module.
Sets the maximum time for the decoding process during a scan.
Redundancy Level
Sets how many successful readings should be done before linear
barcodes such as Codabar, MSI, and Interleaved 2 of 5 can be
decoded.
Security Level
Sets the security level to ensure decoding accuracy considering the
printed quality of barcodes such as Code 128, Code 93, and UPC/EAN.
The higher the level is, the more security is ensured.
Inter-Char Gap Size
Sets the intercharacter gap size for Code 39 and Codabar. This option
is to allow the digital scanner to adjust its decoding standard so as to
tolerate out-of-specification bar codes that are improperly printed
out (which may cause the intercharacter size to become larger).
Sets the reader’s scanning behavior.
Aimer Mode Timeout
A time period that the aiming pattern is projected for Aim Mode.
This function is only available when setting Scan Mode as Aim Mode or
Level and Aim Mode.
Enables an LED light beam to aid barcode reading.
Decode Aiming Pattern
Projects a crosshair at the center of the laser light beam to facilitate
barcode reading.
Picklist Mode
When selected, only barcodes aligned at the crosshair of the laser
light beam will be decoded.
Display Mode
Enables improved performance for reading barcodes on electronic
displays and mobile phones.
Inverse Type
Decides whether to disable or enable decoding inverse barcodes, or
set as auto.
To Next Page
Loading...
Need help?
General
